Answers··7 min read
How do you get a KDP paperback cover template and find the right cover size?
Generate a KDP paperback cover template from trim size, page count and paper type, then use the full-wrap formula with bleed and spine width. Worked example.
On this page
Use KDP’s cover calculator and template generator: enter your interior and paper type, trim size and page count, and it gives you exact cover dimensions and a downloadable template. The full-wrap cover width is bleed + back cover + spine + front cover + bleed, and the height is trim height plus bleed on the top and bottom. Bleed is 0.125 inch (3.2 mm) on the outer edges.
How do you generate a KDP cover template?
You generate it with the print cover calculator on KDP, using a handful of inputs. According to KDP’s cover calculator page, you choose binding, interior type, paper type, reading direction, units, trim size and page count, and it returns the exact dimensions. You can also download the template as a PDF or PNG to use as a guide layer in image editing software.
- Choose your trim size first. It sets the front and back panel size (see KDP trim sizes).
- Pick interior and paper: black ink on white or cream paper, or standard or premium color.
- Enter the final page count of your interior. Get this right, because it changes the spine.
- Download the template, build your art on it, and export a single PDF.
If your page count changes after you generate the template, generate it again. A stale template gives you the wrong spine. You can also check the numbers with our KDP cover calculator guide or the spine width calculator.
What is the KDP paperback cover size formula?
The size is the sum of five measurements across and trim height plus bleed down. The width is Bleed + Back Cover Width + Spine Width + Front Cover Width + Bleed, and the height is Bleed + Trim Height + Bleed.
Bleed is 0.125" (3.2 mm) added to the top, bottom and outside edges, as KDP’s cover help page explains. There is no bleed on the spine side of each panel, because the panels run into the spine. The cover PDF must match your chosen trim size plus these allowances.
| Part | Measurement |
|---|---|
| Outer bleed (left and right) | 0.125" each |
| Back cover | Trim width |
| Spine | Page count × per-page figure |
| Front cover | Trim width |
| Height | Trim height + 0.125" top + 0.125" bottom |
How wide is the spine for each paper type?
Spine width is your page count multiplied by a per-page figure set by paper type. Per KDP’s help page, the figures are:
| Paper | Inches per page |
|---|---|
| White paper (black ink) | 0.002252" |
| Cream paper (black ink) | 0.0025" |
| Standard color | 0.002252" |
| Premium color | 0.002347" |
Page count counts both sides of each sheet, so a 150-sheet book has 300 pages.
What does a worked example look like?
For a 6" × 9" paperback of 300 pages on white paper, the full cover is about 12.93" × 9.25". The spine is 300 × 0.002252 = 0.6756".
- Width: 0.125 + 6 + 0.6756 + 6 + 0.125 = 12.9256"
- Height: 0.125 + 9 + 0.125 = 9.25"
On cream paper the same book has a spine of 300 × 0.0025 = 0.75", so the width becomes 13.05". Switching paper without regenerating the template is a common reason a cover is rejected or sits off-center.
Where do the bleed, spine and barcode areas go?
Keep important text and images inside the safe area, and keep the spine and barcode margin areas clear. KDP advises allowing for a variance of 0.0625" (1.6 mm) on either side of the fold lines, since printing can shift slightly.
- Bleed: extend backgrounds and images into the 0.125" bleed so no white edge shows after trimming.
- Spine text: books need at least 79 pages to carry spine text, with at least 0.0625" between text and the spine edge. KDP’s Cover Creator and Cover Studio ask for 80 pages.
- Barcode: you can upload a cover with or without a barcode. If you don’t add one, KDP places one on the back cover automatically, so leave that area free of text and art.
Placing the barcode box on the template as KDP draws it is safer than guessing its position.
What file does KDP want, and what mistakes cause rejections?
KDP wants one PDF with the back cover, spine and front cover as a single image. The file should be 650 MB at most (40 MB or less recommended) with a minimum of 300 DPI, and CMYK is recommended for images.
- Using the wrong page count or paper type when generating the template.
- Leaving out bleed, or letting text run into the bleed or fold areas.
- Exporting front cover only when you chose a full-wrap upload.
- Adding spine text to a book under 79 pages.
If upload fails, see KDP error processing cover. For design basics, read how to design a book cover.
Can you skip the template and use a cover tool?
Yes, KDP’s own Cover Creator is one option, and other design tools work if you give them the exact dimensions. CruxOne’s AI cover maker can produce a front cover and a full wrap, and you can start on the free plan.
Whichever route you take, check the finished PDF against the numbers from the KDP calculator before you publish. If you want the whole path in one place, publishing to Amazon KDP from CruxOne is available too.
Frequently asked questions
What is the KDP paperback cover size?
It depends on trim size, page count and paper. A 6" × 9" book of 300 pages on white paper needs a full cover of about 12.93" × 9.25" including 0.125" bleed.
How much bleed does a KDP paperback cover need?
0.125" (3.2 mm) on the top, bottom and outside edges.
Where is the KDP cover template download?
In KDP’s print cover calculator. Enter your interior, paper, trim size and page count, then download the template as a PDF or PNG.
How do I calculate KDP spine width?
Multiply page count by the per-page figure for your paper: 0.002252" for white, 0.0025" for cream, 0.002347" for premium color.
Do I have to add a barcode to my KDP cover?
No. You can upload with or without one, and KDP adds a barcode to the back cover if you don’t.
Can I put text on the spine of a short book?
KDP says books need at least 79 pages for spine text, and advises against adding it to shorter books.
Sources
- Amazon KDP: Print Cover Calculator and Templates — checked 20 November 2026
- Amazon KDP Help: Create a Paperback Cover — checked 20 November 2026
- Amazon KDP Help: Print Options — checked 20 November 2026
Figures come from KDP help pages checked on the date shown. KDP can change them, so confirm in its cover calculator before you upload.